Accepting RFQsSend a drawing
Section 01CapabilitiesRev ASheet 1/7

Machines, materials, inspection.

This is the evidence page. Every table below is the full list, not a selection.

Section 02What we make, taken apartRev ASheet 2/7

A drill jig, part by part.

Scroll to take it apart. Each part is labelled the way a parts list would label it.

Skip the 3D view and read the parts list

Exploded view
The drill jig taken apart, each part numbered as in the parts list below.

Jigs, fixtures and tool parts — machined, inspected and assembled under one PO.

Parts list · drill jig
ItemPartMaterial and operations
01BaseplateEN8 · faced + pocketed
02Side plate ×2EN8 · milled + drilled
03Top plateEN8 · bored for bushes
04Drill bush ×3EN31 hardened · turned + ground
05Locating pin ×2EN31 hardened · turned + ground
06Part nest6061 · pocketed
07Toggle clampBought-out
08Socket-head screws ×8Bought-out
Section 03MachinesRev ASheet 3/7

17 machines, listed one by one.

17 CNC machines: 13 VMCs, 1 CNC mill, 3 turning centres. 650 to 1,600 mm of travel, 3- and 4-axis, with CNC turning. Table up to 1750 × 800 mm.

Vertical machining centres · 3- and 4-axis
ItemMachineQtyTable (mm)
01Cosmos CVM 1680×11750 × 800
02Feeler FVP 1300×11420 × 600
03Cosmos CVM 1160×21250 × 600
04Feeler VMP 45A×11200 × 600
05Cosmos CVM 1060×11200 × 550
06Feeler VMP 32A×1950 × 520
07Feeler VMP 30A×3890 × 430
08Cosmos CVM 640×3800 × 450

Max table load 2,000 kg (Cosmos CVM 1680). Mitsubishi M80 control across the VMC fleet. Builder-rated: positioning 0.01–0.015 mm, repeatability 0.003–0.006 mm.

CNC milling and turning
ItemMachineQtyCapacity
01S&T SK-CNC-900×1CNC mill · 1470 × 320 table
02LMW LX20T L5×1Ø320 mm turning diameter, 500 mm length, Ø40 mm bar
03Feeler FTC 20L, Jyoti DX 200×2Chucking and bar work; longer shafts
Section 04ProcessesRev ASheet 4/7

One PO, finished part.

Machining, welding, heat treatment and finishing priced line by line and delivered as one finished part.

Processes · where each is done
ItemProcessDetailWhere
01Machining3- and 4-axis milling; CNC turningAt the facility
02FabricationMIG weldingAt the facility
03FabricationTIG weldingSpecialist partner
04GrindingSurface grinding; milled and ground finishesAt the facility
05Heat treatmentHardening, case hardening and induction hardeningSpecialist partner
06FinishingDeburr and polishAt the facility
07FinishingAnodisingSpecialist partner
08Design supportDrawing review and DFMViorim
Section 05MaterialsRev ASheet 5/7

Steels, stainless, aluminium, copper alloys.

International grade standards, from established Mumbai stockists. Other materials on request: tell us the grade with your drawing.

Steels

  • Mild steel
  • EN1A
  • EN3B
  • EN8
  • EN9
  • EN19
  • EN24
  • EN31
  • EN353 / EN354

Stainless

  • SS304
  • SS316 / 316L
  • SS310
  • SS410

Aluminium

  • 2014
  • 6061
  • 7075
  • Cast LM grades

Copper alloys

  • Brass
  • Gunmetal
Section 06InspectionRev ASheet 6/7

Measured, recorded, shipped with the lot.

Material certificate, cutting slip, process sheet, job card and inspection record tied to your PO.

Inspection instruments
InstrumentRangeResolution
Vernier caliper, Mitutoyo / Baker0–300 mm0.01 mm
Micrometers0–150 mm0.001 mm
Bore gauges, plunger dial1–150 mmBearing fits
Height gauge, Mitutoyo0–400 mmLever dial

Every lot ships with

  1. 01Signed inspection report with measured critical dimensions
  2. 02Material test certificate
  3. 03Delivery challan with PO number, batch, quantity and date
  4. 04Packing matched to the part, with handling marks
Section 07To quote, sendRev ASheet 7/7

Four things get you an itemised quote.

Itemised quote within 48 hours.

  1. 01

    Drawing (PDF) and 3D model (STEP or IGES)

  2. 02

    Material grade, heat treatment or coating

  3. 03

    Quantity per order and annual volume

  4. 04

    Required delivery date

See all six stages, from drawing to repeat production

Send a drawing.

Itemised quote within 48 hours. Every drawing is treated as confidential.

Send a drawing

Download the capability statement

Two pages: machines, materials, inspection and what we make. It downloads straight away and is emailed to you too.

WhatsApp