Sector 02 · For automotive and engineering manufacturers
Fixtures, housings and machined parts, with the paperwork to match.
Jigs, fixtures, gauges and Tier-2/3 production parts for automotive, earth-moving and general engineering supply chains, from a one-off checking fixture to repeat batches.

What we make for automotive buyers
Jigs and fixtures
Welding, assembly and checking fixtures
Manifold and valve blocks
Cross-drilled and tapped ports
Shafts, flanges and hubs
Turned, then drilled and milled on a VMC
Housings and covers
Bores, pockets and sealing faces
Brackets and blocks
Slots, steps and locating holes
Press tool and die parts
Plates, punch holders and inserts
First piece before the batch
The first piece is checked against the drawing before production runs, then re-checked at each stage.
Every lot ships with its paperwork
Signed inspection report, material test certificate, delivery challan and matched packing, with each lot.
One PO, finished part
Machining, welding, heat treatment and finishing priced line by line and delivered as one part.
Where your parts are made.
17 CNC machines: 13 VMCs, 1 CNC mill, 3 turning centres. 650 to 1,600 mm of travel, 3- and 4-axis, with CNC turning.
| Item | Machine | Qty | Table (mm) |
|---|---|---|---|
| 01 | Cosmos CVM 1160 | ×2 | 1250 × 600 |
| 02 | Feeler VMP 32A | ×1 | 950 × 520 |
| 03 | Cosmos CVM 640 | ×3 | 800 × 450 |
Builder-rated: positioning 0.01–0.015 mm, repeatability 0.003–0.006 mm. See every machine
Send a drawing.
Itemised quote within 48 hours. Every drawing is treated as confidential.