Sector 03 · For glass and glassware manufacturers
Mould, tooling and handling parts for glass production.
Precision parts for glass and glassware plants: mould and die-set components, guides and transfer parts, fixtures for handling and storing glass, and spares for production machinery, machined to your drawing.

What we make for glass buyers
Mould and die-set parts
Plates, bolsters, inserts, guide pillars and bushes
Glass handling fixtures
Nests, trays, racks and storage fixtures, including for thin glass
Machine frames and bases
Welded, stress-relieved and machined, up to 1600 × 800 mm
Guides and transfer parts
Guide rails, transfer, conveyor and indexing parts
Wear parts and spares
Shafts, pins, bushes and sleeves, hardened and ground where needed
Plates and brackets
Faced, pocketed, drilled and tapped to your drawing
Large frames and small spares
Machining centres from 650 to 1,600 mm of travel and a table up to 1750 × 800 mm, so a machine base and its small parts come from one shop.
Hardened where it wears
Hardening, case hardening and finish grinding for running, guiding and handling surfaces.
One PO, finished part
Machining, welding, heat treatment and finishing priced line by line and delivered as one part.
Where your parts are made.
17 CNC machines: 13 VMCs, 1 CNC mill, 3 turning centres. 650 to 1,600 mm of travel, 3- and 4-axis, with CNC turning.
| Item | Machine | Qty | Table (mm) |
|---|---|---|---|
| 01 | Cosmos CVM 1680 | ×1 | 1750 × 800 |
| 02 | Feeler FVP 1300 | ×1 | 1420 × 600 |
| 03 | Cosmos CVM 640 | ×3 | 800 × 450 |
Builder-rated: positioning 0.01–0.015 mm, repeatability 0.003–0.006 mm. See every machine
Send a drawing.
Itemised quote within 48 hours. Every drawing is treated as confidential.