Sector 05 · For machine builders and plant engineers
Housings, manifolds, shafts and frames, to your drawing.
Housings, manifolds, shafts, frames, change parts and wear parts for industrial machinery. Milling and turning from prototype to repeat batch.

What we make for industrial buyers
Housings and covers
Bores, pockets, sealing faces
Plates and baseplates
Faced, pocketed, drilled, tapped
Shafts, bushes and flanges
Turned, then milled on a VMC
Brackets and blocks
Slots, steps, locating holes
Jigs and fixtures
Assembly, welding and checking fixtures
Mould, die-set and tool parts
Plates, bolsters, inserts, guides
Small to large in one shop
Machining centres from 650 to 1,600 mm of travel, 3- and 4-axis, with CNC turning. Your whole part family can stay with one supplier.
Turned, then milled
Turning centres and machining centres side by side, so shafts, bushes and flanges are turned and then milled without changing supplier.
One PO, finished part
Machining, welding, heat treatment and finishing priced line by line and delivered as one part.
Where your parts are made.
17 CNC machines: 13 VMCs, 1 CNC mill, 3 turning centres. 650 to 1,600 mm of travel, 3- and 4-axis, with CNC turning.
| Item | Machine | Qty | Table (mm) |
|---|---|---|---|
| 01 | Cosmos CVM 1680 | ×1 | 1750 × 800 |
| 02 | Cosmos CVM 1160 | ×2 | 1250 × 600 |
| 03 | Cosmos CVM 640 | ×3 | 800 × 450 |
Builder-rated: positioning 0.01–0.015 mm, repeatability 0.003–0.006 mm. See every machine
Send a drawing.
Itemised quote within 48 hours. Every drawing is treated as confidential.