Sector 01 · For aerospace and defence programmes
Tooling, fixtures and ground equipment, machined to drawing.
Non-flight precision work for aerospace and defence manufacturers and their suppliers: assembly and drilling jigs, tooling plates, ground support equipment, test-rig parts and mounting hardware.

What we make for aerospace & defence buyers
Assembly and drill jigs
Tooling plates, locators and drill bushes
Test-rig parts
Adaptor plates, mounts and interface blocks
Mounting brackets
For non-flight systems and equipment
Ground support equipment
Welded and machined frames, stands and handling fixtures
Housings and enclosures
Aluminium housings with pockets, bores and sealing faces
Large plates and bases
Up to 1600 × 800 mm on a single set-up
Large and small in one shop
650 to 1,600 mm travel, with 4-axis work, keeps a whole tooling set with one supplier.
End-to-end traceability
Material certificate, cutting slip, process sheet, job card and inspection record are tied to your PO, so any part can be traced back to its bar.
Scope, stated plainly
Tooling, fixtures, ground equipment and non-flight work. That is the whole of what we take on for this sector today.
Where your parts are made.
17 CNC machines: 13 VMCs, 1 CNC mill, 3 turning centres. 650 to 1,600 mm of travel, 3- and 4-axis, with CNC turning.
| Item | Machine | Qty | Table (mm) |
|---|---|---|---|
| 01 | Cosmos CVM 1680 | ×1 | 1750 × 800 |
| 02 | Feeler FVP 1300 | ×1 | 1420 × 600 |
| 03 | Cosmos CVM 1160 | ×2 | 1250 × 600 |
Builder-rated: positioning 0.01–0.015 mm, repeatability 0.003–0.006 mm. See every machine
Send a drawing.
Itemised quote within 48 hours. Every drawing is treated as confidential.